Standard Features:

• Made in 2 sections, body section with legs mounted on rubber tips, legs section on swivel castors with brakes. Leg section can be completely recessed under the body section.
• Size : Body section: L 1000 x W 800 x H 750mm. Leg section: L 900 x W 800 x H 750mm.
• Supports for leg holders with solid mechanism to fix leg holders at required height and width.
• Mattress-pad 2 sections.
• Supplied with 2 legs holders with canvas straps OR 2 knee crutches (as desired) adjustable in height and width.
• Epoxy coated tubular steel frame.
• Mattress-pad density : 21-25 kg/m3.
• Carrying capacity: 150 – 180 kg.
• Mattress-pad: Approx. H 60mm.
• Supplied with S.S. bowl.
• Knockdown construction.

Standard Features:

• Made in 2 sections, body section with legs mounted on rubber tips, legs section on swivel castors with brakes.
• Size : Body section: 1000L x 800W x 750H mm., Leg section: 900L x 800W x 750H mm.
• Supports for leg holders with solid mechanism to fix leg holders at required height and width.
• Supplied with 2 legs holders with canvas straps OR 2 knee crutches (as desired) adjustable in height and width.
• Epoxy coated tubular steel frame.
• Carrying capacity: 150 – 180 kg.
• Supplied with S.S. bowl.
• Knockdown construction.

Standard Features:

• Three sections top made of Stainless Steel
• Leg section can slide completely under the main section.
• Base frame made up of CRCA tubes.
• Trendlenburg position adjustable by pneumatic pump.
• Back rest adjustable on ratchet.
• Height adjustable pair of knee crutches with straps
• Supplied with mattress.
• Pre treated and epoxy powder coated mild steel structure.
• Size : L 1830 xW680 x H 760 mm.

Standard Features:

• Frame made of Pre treated and epoxy powder coated mild steel.
• Three sectional top made of Stainless Steel fixed on trolley base mounted on 125 mm castors.
• Leg section can slide completely under the main section.
• Tendelenburg position can be adjusted by using pneumatic pump.
• Supplied with waste collecting stainless steel bowl and one Stainless Steel IV Rod.
• Back rest adjustable on ratchet.
• Hydraulic Height adjustable by foot paddle from side.
• Hand grips.
• Height adjustable knee crutches with straps,
• Size : L 1830 x W 680 x H 600-760 mm.

Standard Features:

• Fixed height Examination chair position, weight capacity up to 225 kg patient, wide & comfortable upholstery
• Removable and sterilizable ABS gynecological pan
• 5 mono block polyester drawers (3 with bilateral opening)
• Paper roll holder (max. length 600 mm – Ø14 cm)
• Steel frame, with epoxy finish
• All outer parts are accessible for cleaning
• Integrated retractable foot step
• Leg extension cushion
• Overall Width: 714mm
• Overall length: 1550mm (Extension)
• Height with upholstery 795mm
• Gas-spring assisted backrest from 0-75°±5°
• Sliding, retractable foot cushion
• Sliding steel foot step on self-blocking castors
• Manual pelvic tilt (gynecological examination) 5°

Standard Features:

• Delivery Table / Bed, made in 3 sections.
• Size: 1680 × 620 × 800 mm.
• With adjustable Back rest & leg rest to varying positions.
• Framework made of Mild Steel Epoxy coated finish.
• Supplied with S.S. bowl and two leg holders.
• Mounted on protective stumps.
• Freight saving knock-down construction.

Standard Features:

• Delivery Table / Bed, made in 3 sections.
• Size: 1680 × 600 × 800 mm.
• With adjustable Back rest & leg rest to varying positions.
• Framework made of Stainless Steel.
• Supplied with S.S. bowl and two leg holders.
• Mounted on protective stumps.
• Freight saving knock-down construction.

Standard Features:

• Delivery Table / Bed, made in 3 sections. Body Section with legs mounted on rubber tips, legs section on swivel castor with brakes.
• Size: 1680 × 750 × 800 mm.
• With adjustable back rest to varying positions.
• Framework made of Mild Steel Epoxy coated finish.
• Supplied with S.S. bowl and two leg holders.
• Mounted on protective stumps.
• Freight saving knock-down construction.

Standard Features:

• This table is designed for women’s obstetric and gynaecological operation, Easy operation, safe and reliable, economical and quick.
• Operating positions – up / down, forward and backward tilt are controlled by smooth hand wheel. Comfortable for both doctor and Patient.
• Length and width for tabletop: 1800 x 600 mm.
• Height adjustment range: 650 – 895mm.
• Dimension of sections: backrest: 600 X 800 mm, Seat section: 600 x 400 mm, Leg section: 540 x 500 mm.
• Max. degree for backrest adjustment: more than 60 degree upwards, more than 10 degree downwards.
• Max. degree for tabletop forward and backward tilting: more than 8 degree(forward), more than 20 degree(backward).

Standard Features:

• This table is designed for women’s obstetric and gynaecological operation, Easy operation, safe and reliable, economical and quick.
• Operating positions – up / down, adjustable back rest & reverse trendelenburg position.
• It adopts linear bearing to control the telescopic working table.
• Size: 2000/1450 × 900/660 × 620/920 mm.
• All motion controlled with T-Motion Power Device (Actuator) & Battery backup.
• Adjustable leg support and sliding grip holder.
• Main framework made of Expoxy Coated steel.
• High quality beautiful ABS engineering plastic head panel.
• Two easy lifting guardrails (1 on each side), which are safe and reliable, and can be fixed upward and downward.
• 125mm dia noiseless castors with simultaneous braking system which locks / unlocks 2 castors with single pedal press.
• Equipped with 8cm thick high quality foam mattress.

Standard Features:

• Operating positions – Back rest, Trendelenburg / Reverse Trendelenburg, High-low, position maneuverable by remote.
• Back rest: 0-75º
• Trendelenburg: 0-12 º
• Reverse Trendelenburg: 0-12º
• Height Adjustment: 600 mm — 800 mm
• Detachable polymer molded head and foot bows provide a soothing look.
• Two easy lifting polymer side rails.
• Central locking castors of Dia 125mm.
• The complete metal components are Pretreated and Epoxy Powder Coated.
• Provided with High Density three section mattress.
• Corner PU buffers absorb impact and reduce damage in handling.
• IV Stand with provision for fixing it at all four locations.
• Frame size (Approx.): L 2130mm X W 1050mm (when fully extended)
• Accessories : one collection tray, one set of lithotomy rod and crutches, one heavy duty IV pole, one set of hand grip.
• Dust Protective Base Cover

• LDR bed is designed for all stages of labour, delivery and recovery.
• Provides comfort and safety to the mother during the crucial time of child birth.
• Adopts several positions of predelivery and various delivery positions such as lithotomy, sitting, squatting, lateral
• Semi-prone and Trendelenberg. Complications and operations can be performed immediately without transferring patients.
• If transfer is needed, this wheeled LDR bed can be lifted to a stretcher height.
• The equipment of this bed is suitable for all birth and delivery processes except caesarean section and general anesthesia delivery.

Standard Features:

• Electrically operated LDR bed with Embedded control panel on both side of guard rails for easy patient access.
• PP Guard rails with build in steel frame provides protection from falling.
• High quality sturdy PF (synthetic polymers) base mattress platform (Back and seat section), which is easily disinfected.
• Removable Aluminium foot section which is easy to install,dissassemble and height adjustable.
• With V shaped incision mattress section, Steel foam covered rotatable labour grips, Fixed rotatable leg support.
• PF Foot pedal with built-in steel frame are flexible and adjusted to any position manually.
• One Button Trendelburg position, Manual CPR with cushion to prevent instant drop.
• Noiseless castors with Central braking system and battery backup.
• Detachable head board / Provision for IV pole on both side of head postion.
• SS basin / Night light / Bumper / Emergency stop button.

Specification parameters:

• Overall size : L2320 x W990 x H485mm (± 10mm)
• Mattress platform : L2000 x W860mm (± 10mm)
• Lowest position (without mattress) : 485 (± 10mm)
• Highest position (without mattress) : 860 (± 10mm)
• back section angle : ≥ 63º
• Maximum seat section angle : ≥ 15º
• Maximum loading capacity : 227 kg

Standard Features:

• Electrically operated Remote controlled backrest and height adjustment, Designed for Gynecology, Examination, Urology and simple surgical operations.
• Size : L 2035mmXW600mmH (550mm- 850 mm).
• Manual Trendelenburg (0-12°) by crank
• Epoxy powder coated framework, Manual CPR -with handles on both side of backrest
• Four castors – 125mmDiameter, Linear locking system
• Height adjustable IV pole- 2 hooks ,urine bag holder
• Easily removable Leg holders
• Mattress : 28 Density Foam upholstery of fabric or artificial leather

Specifications/Details :

• Complete Stainless Steel 304 Construction
• Backrest movement on ratchet
• Trendelenburg position through hydraulic pump
• Sliding foot rest
• Three section top with mattress and Knee Crutches
• U Cut in center part with SS bowl